What Are The Direct Factors That Affect The Production Efficiency
Of The Waste Paper Baler?
equipment supplier Share with you:
The quality of the hydraulic oil used in the paper
baler machine directly determines whether the oil cylinder can play a great
role, and also directly affects the failure rate and service life
of the oil cylinder. In order to ensure the effective production of
the baler, No. 46 anti-wear hydraulic oil is required. The direct
influence factors of the production efficiency of the waste paper
baler are: the model and specifications of the baler, the output of
different models is different, and the different specifications
directly determine the production efficiency of the baler. The
production efficiency of the conventional waste paper baler is
higher than that of the baler with an outlet.
paper baling machine is packed by tensioning, heat capacity, tape cutting and gluing.
Regardless of the size of the package, the carton waste paper
packing machine can pack without adjusting the machine. The waste
paper baler is a mechanical structure, and some parts are imported
cotton baler parts. The back cutting edge is stable and reliable,
easy to adjust, and the waste paper baler is reasonably priced.
When the ultrasonic generator is running, the ultrasonic energy is
converted by the ultrasonic wave. Flash point of automatic shearing
1. The cutting machine is complete, beautiful, smooth and smooth,
and the edges are not scattered, and the cutting effect is good;
2.Shearing machine adopts PLC console, automatic feeding, computer
counting, high precision, fast speed, fast adjustment, simple
adjustment, fast, high efficiency, can cut multiple times at once
3, mostly used for gift belts, nylon belts. In the field of
shearing machine production, such as shearing belts, such as
scissors, inclined blades, dovetails, etc .; This product is widely
used in packaging, metal processing, sheet cutting and other
industries. The new fully automatic shearing machine (ultrasonic
cutting machine) is a combination of ultrasonic welding technology
and traditional shearing machine. Its good shearing effect is
favored by friends around the world.
There are different reasons why air enters the waste paper baler
system. During use and maintenance, please note the following:
1. An exhaust valve must be installed on the top of the waste paper
baler to exhaust air from the cylinder and the system. The change
in oil temperature and load adjusted by the straw baler is greater
than the throttle valve, and a flow control valve is used. The
parallel hydraulic cylinder synchronization circuit has a simple
structure and low cost, and is widely used.
2. Try to prevent any pressure in the waste paper packer system
from falling below atmospheric pressure. At the same time, a
particularly good sealing device is used. Replace the fault in
time. Tighten the fittings and the surface of each fitting, and
clean the suction pipe promptly. Pack the oil filter at the tank
3. Always check the liquid level of the waste paper baler. The
height of the waste paper baler should be maintained on the
mimeograph scale. On low surfaces, the suction nozzle and the same
pipe opening should also be below the liquid level. Delimited by
Qunfeng offers commissioning and training after machine or installation is
supplied and installed. Our main products including municipal solid
waste(msw), vertical waste transfer station project, plastic baler
machine, weighing apparatus, underground or overground vertical
waste transfer station system, underground waste container system,
baler machine, etc.
If you want to know more about waste sorting plant, you can click here.